⎝⎛天天电玩城⎞⎠

欢迎光临宜安特官方网站! Collection of this site | Online message | Anti-theft solution | Supermarket anti-theft device manual download Welcome to Yi'an official website!

超市防盗设备

24小时全程售后 Supermarket anti-theft device system service hotline: 400-6936-636 24-hour after-sales service

14 years · Focus on EAS anti-theft series product manufacturers. Stable performance · Intelligent security

3800一发一收主板安装视频

3800 launch and receive motherboard installation video

Anti-theft device 3800 main board one issue one acquisition channel installation test video tutorial:

防盗设备3800主板一发两收双通道测试

Anti-theft device 3800 mainboard

The anti-theft device 3800 motherboard sends two and receives two channels of operation test, please see our video:

防盗设备3800主板两发两收测试

Anti-theft device 3800 motherboard test

First, take out the bought anti-theft antenna and the supporting 3800 motherboard equipment. Take it out of the carton, open the bottom cover of the antenna, connect the transmitting and receiving with the power cable, connect the power, test the channel effect, and check whether the antenna is connected power supply. After the test is completed, unplug the power supply and do the same test on the other side. Then, the two transmitting antennas are processed synchronously with a synchronization line, one antenna is selected as the secondary transmission, and the jumper cap on the main board of the selected secondary transmitting antenna is changed from the primary transmission to the secondary transmission position, and then the synchronization test effect is performed. Please see the test for detailed operation.

防盗天线EC521测试眼镜标签

Anti-theft antenna EC521 test glasses label

How to test the glasses label, install the anti-theft antenna at the store entrance, then attach the label to the glasses, and then pass the anti-theft antenna back and forth to test. For details, please refer to our official video glasses label test.

射频防盗天线EC518测试小方扣

RF anti-theft antenna EC518 test small square buckle

How to test the small square buckle, let me tell you now. First of all, you must install an anti-theft antenna, install the anti-theft antenna, fix the distance, and then test it around the anti-theft antenna with a small square buckle. For specific operations, please see our official video.

防盗射频主板5800测试软标签

Anti-theft RF motherboard 5800 test soft label

First, install the anti-theft radio frequency motherboard 5800 on the anti-theft antenna shelf. After installation, stick the soft label on the product or product packaging on a smooth and clean surface. Colleagues keep the label straight and pay attention to the flat and beautiful appearance. After that, take this soft-labeled product (substance) back and forth between the anti-theft antenna installed with the RF motherboard, until the test meets the requirements. See our official video for details. If you do n’t understand, please contact our official personnel.

防盗天线测试商品防盗软标签视频

Anti-theft antenna test product anti-theft soft label video

First of all, the anti-theft antenna must be fixed and installed, and the product anti-theft soft label should be debugged within a certain range. The range should not be too wide, and the test will be inaccurate if it is too wide. You must test according to the installation instructions of the anti-theft antenna. After the anti-theft antenna is installed and fixed, the anti-theft soft label is attached to (attached to) the anti-theft product, and it is moved back and forth, and it is tested until it meets its own requirements. You can watch our official video for testing. If you don't understand, please contact our official staff to answer your questions.

Contact Yi Ante
Consulting Hotline: 400-6936-636

Fax: 0755-21008032

Customer service QQ: 2355605582

mailbox:
szeant@frzdzj.com

Company Address: 5th Floor, Building A, Longquan Science Park, Huaxing Road, Dalang Street, Longhua New District, Shenzhen

七乐彩 欢乐拼三张 天天电玩城 欢乐拼三张